What is Mulpin ?

The Mulpin concept is to embed components, both active and passive, into multi-layered Printed Circuit Boards (PCBs). By embedding all Mulpin components within the PCB, we eliminated all the common problems associated with surface-mounted components by removing exposure to the elements.

PCB’s traditionally are manufactured by soldering electronic components such as transistors, resisters, memory chips, capacitors etc to tracks on the surface of a board. Mulpin components however are different as they are mounted within the board via an opening into the PCB from its top surface. Thus the connections for any given component can be made to multiple layers of the PCB including the top and bottom surface layers, thus spreading them vertically into the PCB as well as horizontally around the perimeter of a component.

An example of a 3 layer Mulpin component embedded within a multi layer board will result in a component three times smaller than the conventional type, but it occupies three layers of the PCB instead of one. This results in smaller components and smaller PCB’s. Furthermore Mulpin technology requires no changes to the current PCB manufacturing process.

History of Mulpin

As a designer of High Frequency Radio equipment for over 40 years (with the last 20 years designing Military communication devices), Mulpin lead inventor Mr. Rodney Green found difficulties in sufficiently isolating one stage of a radio system from another, this can cause problems with interference generated within the equipment, thus reducing the effectiveness of the communication system at some frequencies. It’s an extremely time consuming process to identify and remove such problems. This would usually involve design compromises and more often than not external shielding on the Printed circuit Board used in the system required. This would involve considerable extra design time, with added expense to production.

Evolution of Mulpin

It was then I thought that it may be possible to bury the components within a PCB and shield them from each other using the copper cladding on the PCB. Burying conventional components had already been tried, but it was messy and expensive.

I devised a way to change electronic components in such a way that made burying the components possible without the need to modify current PCB production methods. Coincidentally the components would also become self shielding against Radio Frequency Interference and indeed even Electro Magnetic Pulse, (EMP) generated by high altitude nuclear weapons, powerful microwave transmitters and other man made devices which could be used to destroy important electronic equipment and infrastructure during warfare and or terrorist attack. They would also be shielded against natural incidences of EMP from space which can damage satellite circuitry.

We soon discovered after our first Prototypes were built by “Mulpinising” existing components and inserting these into the new format PCB’s to test that their performance exceeded our expectations with regard to EMP screening and heat dissipation. These PCB’s were built in a conventional PCB factory with no difficulty. This should ensure that the Mulpin system will start a new industrial revolution within the PCB and Component industries worldwide.

A second batch of prototypes were built which were able to withstand being placed in a microwave oven and into a one million Volt spark from a Tesla coil. The test results from these prototypes can be seen by clicking on Intellectual property and then Test results on this site.

More detail can be obtained by sending an email to the inventors at the following address:- info@mulpin.com

Mulpin Adventages

The components which use this system can be both active and passive, and the inventors have claimed several advantages over currently produced components. These include;

  • Greatly improved heat dissipation to the PCB substrate.
  • Lower temperature operation for given component size means smaller components, and thus less PCB space used for a given circuit.
  • More pins (connections) for a given component footprint, meaning smaller components.
  • Greater internal electrical screening means less internally generated interference in radio and other sensitive systems.
  • Shorter design time aids in cost reduction, particularly for smaller production runs where design time can be a significant portion of final product price.
  • Faster operating speed, due to low lead inductance on parts designed for very high speed operation.
  • Components are self screening from RFI/EMI.
  • Greater immunity to EMI/RFI and EMP to and from all sources, at component and system level.
  • Mulpin PCBs are water, vibration and dust proof which increases their use in many fields previously limited by conventional PCBs.
  • Considerably better security of data on a Mulpin system as it is extremely difficult or even impossible to reverse engineer due to the inherent buried nature of Mulpin parts where required.
  • Better component reliability due to lower temperature fluctuations between on and off times.
  • No need to change current PCB manufacturing techniques.
  • Perfect mechanical and electrical symmetry is possible with balanced radio frequency circuits such as mixers, push pull amplifiers, and frequency multipliers, extending the upper frequency limit of these circuits.
  • Components especially suited to the Military and aerospace, but are most likely to appear in all electronic circuits in due course. For more information and other advantages please contact: - info@mulpin.com

Inventors

Rodney Green

Perry Kelly

Kevin Bellette

For further information please email info@mulpin.com

Management Team

Rodney Green - Director, Lead Inventor and Head of R & D: Rodney’s 40 + years in the electronics industry have been marked by highly innovative PCB design capabilities, Electronic design skills with many inventions from electronic portable hypodermic needle furnace which was exported to Japan and his well known international publicised Dirodyne radio architecture. He has written many articles of ground breaking concepts that are being used in the international market place. His skills have gained Rodney a well deserved reputation throughout the industry. rodney.green@mulpin.com

Perry Kelly - Director and CEO: Since 1970 Perry has been in managerial roles initially within the office equipment industry. His expertise has been in management & sales training. His other areas of expertise are in marketing. In the last decade his focus has been in the commodity markets and has gained a great deal of experience in international negotiations. In addition he is involved within the IT industry, specifically in payment systems perry.kelly@mulpin.com

Kevin Bellette - Director and Co-Founder: Kevin is one of 3 co-founders and a director of Mulpin Research Laboratories Limited. Before co-founding MRLL, Kevin was an Authorised Asia Office Partner with St Andrews securities, which included Stock Listing, Corporate Finance and Capital Raising. kevin.bellette@mulpin.com

Gareth Harvey - Assistant Inventor & 2IC R & D: Gareth Harvey specialises in audio and digital electronic design, including hardware and software design. He has had many years focused in the radio communications sector and is a Bachelor of Electronics and Communications Engineering. Gareth brings a wealth of expertise to the Company. gareth.harvey@mulpin.com

Craig Matheson - Technical Adviser: Craig started his electronics career with the military in the early 80’s and for the past 10 years with an international military supply company as Manager of Electrical Engineering Division and is a Bachelor of Engineering in Electrical Engineering and has an Associate Diploma of Electrical Engineering. craig.matheson@mulpin.com

Bernard Hoey - Chief Finance Controller & Company Accountant: Bernard is a partner in the accountancy firm “Burswood Partners” (formerly Roper Hoey) for 25 years. He has extensive experience in consulting with businesses in a wide range of matters including: Taxation • Positioning businesses for ultimate sale • Financing transactions. Bernard’s entrepreneurial approach to tasks has been useful in finding innovative solutions to a variety of business problems experienced by corporate clients. He is a Certified Practising accountant and a fellow of the Taxation Institute of Australia. bernard.hoey@mulpin.com

Joseph Stecewycz – Mulpin’s Patent Attorney/Legal Council: Joseph is a patent attorney currently in private practice in the US prosecuting electrical, software, and mechanical patent applications.  He has been employed at three of the patent law firms in the Boston area, and has also served as patent counsel for the Polaroid Corporation. Prior to his legal practice, he worked as an electrical/systems engineer in the defense industry, testing and modifying aircraft electronics and missile radar systems.  In addition to his legal background, Joseph also holds degrees in engineering and physics. joseph.stecewycz@mulpin.com

Paul Stewart – Mulpin’s Lead Licensing Professional: Paul is the Managing Director of PASCO Ventures LLC located in Indianapolis USA. He is a Certified Licensing Professional and is listed in “Who’s Who in America,” “Who’s Who in the World” and “Who’s Who in Medicine and Healthcare.” Paul Stewart received a Bachelor of Science degree in agricultural business management in 1976 from Purdue University, and a Master of Business Administration degree from Harvard University School of Business in 1987. Is President and Chairman of the Board of Governors of the “Certified Licensing Professionals” organization, and on the Advisory Board of DePauw University’s Management. paul.stewart@mulpin.com

Peter Kasprzak – Business Development Manager: Peter Kasprzak is an innovator and entrepreneur with expertise in sales, marketing, and business development. Over his career Peter gained experience in United States and Australia in fields of emerging technology, automotive industry, energy and environment. Peter is the co-founder of Innovate Australia and immediate past President of Inventors Association of Australia. He is the co-founder and Director of a geophysics company and board member of Australian Solar Council WA. His previous directorships included a roadside assistance provider, electric vehicle charging supplier, and a national crime prevention organisation. Peter also headed WA bid group to create Sustainable Electric Transport Cooperative Research Centre (SET CRC) in Western Australia. peter.kasprzak@mulpin.com

Adam Osseiran – Senior Technical Manager: Adam Osseiran has been involved with advanced electronic and microelectronic technologies for the last 30 years in both industry and academia. He is the director of a national project relating to the Australian semiconductor industry. With a PhD in microelectronics, President of Inventors Association of Australia WA. Adam has co-founded three companies with advanced sensing technology for environmental monitoring and the emerging Internet of Things (IoT) markets. adam.osseiran@mulpin.com

Lam Truong – Manager Commercialisation Licensing & Manufacturing: Lam has a Masters of Electronic Engineering. He is extremely qualified in business development, technological & marketing research, PCB design and software development, production quality assurance & control, concept design to full production, Electronic Systems Engineer. Lam has also published a number of conference papers including “Micro Engineered Accelerometers” and speaks fluent English & Chinese. lam.truong@mulpin.com

Anthony Leung – Technical & Marketing Advisor: Anthony Leung holds a Bachelor’s Degree (Major) in Electronics Engineering and resides in Hong Kong. His speciality is Electronic components I.C & Sensors, Telecommunication Instruments and accessories for Optical Fibre, Data transmission architecture in remote control system. Circuit and new product design (Electronic & Electrical) and vast experience in Sales & Marketing. anthony.leung@mulpin.com

Christopher Gabriel – Assistant Finance Controller: Christopher Gabriel’s career is focused on finance, marketing, entrepreneurship, and customer experience management. Has a Master of Business in Applied Finance and a Masters in Business Administration. christopher.gabriel@mulpin.com

Board of Management

Rodney Green - Director - Lead Inventor and Head of R & D: Rodney’s 40 + years in the electronics industry have been marked by highly innovative PCB design capabilities, Electronic design skills with many inventions from electronic portable hypodermic needle furnace which was exported to Japan and his well known international publicised Dirodyne radio architecture. He has written many articles of ground breaking concepts that are being used in the international market place. His skills have gained Rodney a well deserved reputation throughout the industry. rodney.green@mulpin.com

Perry Kelly – Director and CEO: Since 1970 Perry has been in managerial roles initially within the office equipment industry. His expertise has been in management & sales training. His other areas of expertise are in marketing. In the last decade his focus has been in the commodity markets and has gained a great deal of experience in international negotiations. In addition he is involved within the IT industry, specifically in payment systems. perry.kelly@mulpin.com

Kevin Bellette - Director and Co-Founder: Kevin is one of 3 co-founders and a director of Mulpin Research Laboratories Limited. Before co-founding MRLL, Kevin was an Authorised Asia Office Partner with St Andrews securities, which included Stock Listing, Corporate Finance and Capital Raising. kevin.bellette@mulpin.com

Privacy Policy

This privacy policy sets out the information gathering and dissemination practices of Mulpin Research Laboratories Limited (Mulpin) and its affiliates and subsidiaries. By using the Websites, you are consenting to this privacy policy and the collection, use and disclosure of your personal information by Mulpin as outlined in this privacy policy. If this privacy policy is not acceptable to you, please do not submit any of your personal information.

We may update this privacy policy from time to time and you are responsible for periodically reviewing the most current version of this privacy policy on the Websites. Your continued use of the Websites or submission of information will be deemed your conclusive acceptance of the updated privacy policy.

In this Privacy Policy, the phrase “Service Providers” includes, but is not limited to, any licensors, suppliers, information providers or other third parties that provide, from time to time, any data, information, content, application, tool or service for purposes of the Websites.

Collecting, Using and Disclosing Information

This privacy policy describes our policies regarding the collection, use and disclosure of the personal information that we (or our Service Providers on our behalf) collect about you on the Websites such as your name, address, phone number, fax number, e-mail address or payment information.

We may collect this information when you subscribe to, or sign your company up for, certain services, tools or features that we provide, when you register for seminars or other programs that we offer, when you fill out forms made available through the Websites, when you enter a promotion or contest, when you complete a survey, when you e-mail us with general inquiries or with your comments or suggestions, or otherwise in connection with your use of the Websites.

We will limit the personal information we collect to what we need for the purposes for which it was collected, and will use such personal information for such purposes. We may also use personal information we collect to provide you with information on products, services and events that we or third parties offer that we believe may be of interest to you. If we wish to use your personal information for any other purpose, we will obtain your consent before using the information.

Storing of Information and Restricting Access

We may store your personal information (in encrypted form where we believe it to be highly sensitive) in electronic databases or e-mail boxes hosted by us or our Service Providers, for periods of time and with safeguards that we believe are reasonable depending on the nature and sensitivity of the information. Access to the information is restricted in accordance with our security protocols.

Certain features on the Websites are password-protected to prevent unauthorized access. You are responsible for the confidentiality and use of such passwords.

Due to the nature of Internet communications and evolving technologies, Mulpin cannot provide assurance that the personal information we collect will remain free from loss, interception, misuse or alteration by third parties and Mulpin and its Service Providers shall have no liability for any loss, interception, misuse or alteration.

Automatic Collection of Information

In some cases, we may collect information about you that is not personally-identifiable. Examples of this type of information include your Internet protocol (IP) address, the type of Internet browser you are using, the type of computer operating system you are using, and the advertisement or domain name of the website from which you linked to the Websites.

Cookies

Some pages on the Websites use a technology called “cookies”. A cookie is a token that a server gives to your browser when you access a website. Cookies are capable of storing many types of data. Cookies may be placed by Mulpin or a third party. Cookies help provide additional functionality to the Websites or help provide and analyze Website traffic and usage information. For instance, our server may set a cookie that keeps you from having to enter a password more than once during a visit to one of the Websites. In all cases in which cookies are used, we will not collect personally-identifiable information except with your permission. With most Internet browsers, you can erase cookies from your computer hard drive, block all cookies, or receive a warning before a cookie is stored. Please refer to your browser instructions or help screen to learn more about these functions.

Releasing Information

We may provide your personal information to other persons but only if:

* we have your consent;

* we provide the information to Service Providers who assist us in serving you and who have agreed to appropriate contractual provisions regarding the protection of personal information in accordance with applicable law; or

* we are required to do so by law, regulation or court order.

* We may send your personal information outside of the country for the purposes set out herein, including for process and storage by Service Providers in connection with such purposes, and you should note that while such information is out of the country, it is subject to the laws of the country in which it is held, and may be subject to disclosure to the governments, courts or law enforcement or regulatory agencies of such other country, pursuant to the laws of such country.

Respecting and Responding to Your Privacy Concerns

You have the option to refuse or withdraw consent to the collection, use and disclosure of your personal information, and we will respect your choices. If you wish to exercise this option or if you have any questions or enquiries with respect to our privacy policies or procedures, please send an email request to: perry.kelly@mulpin.com. We will investigate and respond to your concerns about any aspect of our handling of your information.

BY USING THE WEBSITES, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS PRIVACY POLICY, UNDERSTAND IT AND AGREE TO ALL OF THE TERMS AND CONDITIONS IN THIS PRIVACY POLICY.

Website Terms & Conditions

The following terms and conditions (“Terms of Use”) govern the relationship between you, Mulpin Research Laboratories Limited (Mulpin) and its affiliates and subsidiaries. By using the Websites, you are agreeing to comply with and be legally bound by the terms and conditions as set out in these Terms of Use. If these Terms of Use are not acceptable to you, please do not use the Websites.

We may update these Terms of Use from time to time and you are responsible for periodically reviewing the most current version on the Websites. Your continued use of the Websites will be deemed your conclusive acceptance of the updated Terms of Use.

In this Terms of Use, the phrase “Service Providers” includes, but is not limited to, any licensors, suppliers, information providers or other third parties that provide, from time to time, any data, information, content, application, tool, feature or service for purposes of the Websites.

Rights Granted and Restrictions on Use

Mulpin grants to you a limited non-exclusive, non-transferable license to view and print the material on the Websites for your non-commercial or personal use only. All copies that you make must retain all copyright and other notices that are on the Websites. Except as provided in the previous sentence, you may not use, distribute, sell, modify, transmit, revise, reverse engineer, republish, post or create derivative works (where applicable) of the trade-marks, trade names, logos, design, layout, information, data, software, applications, interactive features, tools, services or other material or content on or made available through the Websites (referred to collectively, as the “content” of the Websites) without Mulpin’s prior written permission. You acknowledge and agree that the Websites and their content are the property of Mulpin, its affiliates and Service Providers and you will not acquire any rights or licenses in any trade-marks, patents, copyright or other intellectual property on the Websites or in its content. The Websites and their content are protected by copyright, both individually and as a collective work or compilation and by trade-mark law, patent law and any other applicable laws.

Your Authority to Use The Websites

By using the Websites, you are representing to us that you have the power and authority to accept these Terms of Use and to enter into this agreement with us, that you are capable of assuming, and do assume, any risks related to the use of the Websites and their content, and that you understand and accept the terms, conditions and risks relating to their use.

If you are dissatisfied with the Websites or their content, your sole and exclusive remedy is to stop using them.

Disclaimers

The content on or made available through the Websites is for informational purposes only and is not intended to provide legal, accounting, tax, investment, financial or other advice and such content should not be relied upon for such advice.

Mulpin, its Service Providers and each of their respective affiliates, directors, officers, agents and representatives assume no liability for any inaccurate, delayed or incomplete content, nor for any actions taken in reliance thereon. The content contained on or made available through the Websites, including without limitation, the content obtained through Service Providers or through any other link, has been supplied by such Service Providers or other third parties without verification by us.

The views, opinions and advice of any third party provided on the Websites reflect those of the individual authors and are not endorsed by us. Past performance is not necessarily indicative of future performance. Prior to making any investment decision, it is recommended that you consult directly with the individual or firm and seek advice from a qualified investment advisor.

Neither Mulpin nor any of its affiliates or Service Providers make or have made any recommendations regarding the securities or investment services of any person or entity with respect to the content of the Websites, or of the advisability of investing in securities generally for any particular individual.

ALTHOUGH THE CONTENT HAS BEEN OBTAINED FROM SOURCES BELIEVED TO BE RELIABLE, THE WEBSITES AND THE CONTENT COULD INCLUDE TECHNICAL OR OTHER INACCURACIES OR TYPOGRAPHICAL ERRORS AND THEY ARE PROVIDED TO YOU ON AN “AS IS” BASIS WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND.

MULPIN, ITS AFFILIATES AND SERVICE PROVIDERS MAKE NO REPRESENTATION AND DISCLAIM ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS OF ANY KIND, INCLUDING WITHOUT LIMITATION, REPRESENTATIONS, WARRANTIES OR CONDITIONS REGARDING ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGEMENT, SATISFACTORY QUALITY, MERCHANTABILITY, MERCHANTABLE QUALITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR THOSE ARISING BY LAW, STATUTE, USAGE OF TRADE, OR COURSE OF DEALING. TMX, ITS AFFILIATES AND SERVICE PROVIDERS ASSUME NO RESPONSIBILITY TO YOU OR ANY THIRD PARTY FOR THE CONSEQUENCES OF ANY ERRORS OR OMISSIONS.

Trade-marks

You are not permitted to use any of the trade-marks displayed on the Websites without the prior written consent of Mulpin or the third party that owns the trade-mark.

Non-Confidential Use of Your Postings

Any non-personal communication, comments, ideas or material you post or transmit to Mulpin is, and will be treated as, non-confidential and non-proprietary.

By transmitting or posting any communication or material to the Websites you grant to Mulpin and all of its affiliates, an unrestricted, irrevocable license to use, reproduce, display, modify, transmit, distribute, publish, broadcast or post your communication for any purpose.

You also agree that Mulpin is free to use any ideas, concepts, know-how or techniques that you send us for any purpose. However, we will not release your name or otherwise publicize the fact that you submitted materials or other information to us unless: (a) you grant us permission to do so; (b) we first notify you that the materials or other information you submit to a particular part of a site will be published or otherwise used with your name on it; or (c) we are required to do so by law.

Protecting Information

We have reasonable security measures in place to protect against the loss, misuse and interception by third parties of the information under our control. However, complete confidentiality and security is not yet possible over the Internet. We assume no liability for any damages you may suffer as a result of loss, interception, alteration or misuse of information you provide us or any information transmitted over the Internet. Please see our Privacy Policy for further details.

Changes to Terms of Use

Mulpin reserves the right to revise these Terms of Use at any time without notice to you. You are bound by such revisions so we encourage you to visit this page frequently to stay informed.

Website Modification

Mulpin may change the Websites, including eliminating or discontinuing any content on or made available through the Websites, at any time and in its sole discretion.

Violations of Terms of Use

Mulpin reserves the right to seek all remedies available at law and in equity for violations of these Terms of Use, including the right to block access from a particular Internet address to our Websites.

Other Countries

The Websites can be accessed from countries around the world other than Australia and may contain references to Mulpin products, services, and programs that have not been announced in your country.

These references do not imply that Mulpin intends to announce such products, services or programs in your country.

Mulpin makes no representation that the content on the Websites is appropriate or available for use in other locations, and accessing the Websites from territories where its content is illegal is prohibited.

Those who choose to access the Websites from other locations do so on their own initiative and their own risk and are responsible for compliance with local laws.

Laws

The Websites (excluding linked sites) are controlled by Mulpin from its offices within Australia. By accessing the Websites, you and Mulpin agree that all matters relating to your access to, or use of, the Websites shall be governed by the statutes and laws of the Province of Australia, as applicable, without regard to the conflicts of laws principles thereof. You and Mulpin also agree and hereby submit to the exclusive personal jurisdiction and venue of the courts of Australia with respect to any and all matters arising in connection with these Terms of Use.

How to Contact Us

If you have submitted personal information through the Websites or any interactive advertisements, and would like that information deleted from our records, please contact us at our e-mail address info@mulpin.com.

We will use reasonable efforts to delete this information from our existing files.

YOU ACKNOWLEDGE THAT YOU HAVE READ THESE TERMS OF USE, UNDERSTAND THEM AND AGREE TO BE BOUND BY ALL OF THE TERMS AND CONDITIONS IN THESE TERMS OF USE.

Investor Relations and Related Matters

Caution Regarding Forward-Looking Information

The Websites may contain “forward-looking information” that is based on expectations, assumptions, estimates, projections and other factors that management believes to be relevant as of the date of the content published on the Websites. Often, but not always, such forward-looking information can be identified by the use of forward-looking words such as “plans”, “expects”, “is expected”, “budget”, “scheduled”, “targeted”, “estimates”, “forecasts”, “intends”, “anticipates”, “believes”, or variations or the negatives of such words and phrases or statements that certain actions, events or results “may”, “could”, “would”, “might” or “will” be taken, occur or be achieved or not be taken, occur or be achieved.

Forward-looking information, by its nature, requires us to make assumptions and is subject to significant risks and uncertainties which may give rise to the possibility that our expectations or conclusions will not prove to be accurate and that our assumptions may not be correct.

Examples of such forward-looking information include, but are not limited to, factors relating to stock, derivatives and energy exchanges and clearing houses and the business, strategic goals and priorities, market condition, pricing, proposed technology and other initiatives, financial condition, operations and prospects of Mulpin, which are subject to significant risks and uncertainties.

These risks include: competition from other exchanges or marketplaces, including alternative trading systems and new technologies, on a national and international basis; dependence on the economy of Australia; adverse effects on our results caused by global economic uncertainties; failure to retain and attract qualified personnel; geopolitical and other factors which could cause business interruption; dependence on information technology; vulnerability of our networks and third party service providers to security risks; failure to implement our strategies; regulatory constraints; risks of litigation; dependence on adequate numbers of customers; failure to develop or gain acceptance of new products; currency risk; adverse effect of new business activities; not being able to meet cash requirements because of our holding company structure and restrictions on paying dividends; dependence and restrictions imposed by licenses and other arrangements; dependence of trading operations on a small number of clients; new technologies making it easier to disseminate our information; risks associated with our clearing operations; challenges related to international expansion; restrictions on ownership of Mulpin shares; inability to protect our intellectual property; dependence on third party suppliers; adverse effect of a systemic market event on our derivatives business; risks associated with the credit of customers; cost structures being largely fixed; risks associated with integrating the operations, systems, and personnel of new acquisitions; and dependence on market activity that cannot be controlled. Actual results and developments are likely to differ, and may differ materially, from those expressed or implied by the forward-looking information contained on the Websites.

Such forward-looking information is based on a number of assumptions which may prove to be incorrect, including, but not limited to, assumptions in connection with the ability of Mulpin to successfully compete against global and regional marketplaces; business and economic conditions generally; exchange rates (including estimates of the U.S. dollar – Australian dollar exchange rate), the level of trading and activity on markets, and particularly the level of trading in Mulpin’s key products; the continued availability of financing on appropriate terms for future projects; productivity at Mulpin, as well as that of Mulpin’s competitors; market competition; research & development activities; the successful introduction of new derivatives and equity products; tax benefits/changes; the impact on Mulpin and its customers of various regulations; Mulpin’s ongoing relations with its employees; and the extent of any labour, equipment or other disruptions at any of its operations of any significance other than any planned maintenance or similar shutdowns.

While we anticipate that subsequent events and developments may cause our views to change, we have no intention to update this forward-looking information, except as required by applicable securities law. This forward-looking information should not be relied upon as representing our views as of any date subsequent to the date on each individual page of content or documents included on the Websites. We have attempted to identify important factors that could cause actual actions, events or results to differ materially from those current expectations described in forward-looking information. However, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended and that could cause actual actions, events or results to differ materially from current expectations. There can be no assurance that forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking information. These factors are not intended to represent a complete list of the factors that could affect us.

Terms & Conditions of Website

All content to this website remains the property of Mulpin Research Laboratories Limited (MRLL) and cannot be copied, reproduced, distributed, duplicated, transmitted, uploaded, sold, leased, shared, licensed, or otherwise exploited for any other purpose whatsoever without the prior written consent of MRLL.

Terms & Conditions - Offer Document

Mulpin Research Laboratories Limited makes no representation about the underlying value of the securities on offer. Prospective investors must make their own assessment about whether the price of the securities being offered represents fair value.

INVESTOR WARNING

a) Investment in new business carries high risks. It is highly speculative and before investing in any project about which information is given, prospective investors are strongly advised to take appropriate professional advice;

b) The information contained in this publication has been prepared by Steppingstone Funding Pty Ltd on behalf of the Company and have not undertaken an independent review of the information contained in this publication;

c) The information contained in this publication about the proposed business opportunity and the securities or scheme interests is not intended to be the only information on which the investment decision is made and is not a substitute for a disclosure document, Product Disclosure Statement or any other notice that may be required under the Corporations Act, as the Act may apply to the investment.

d) Detailed information may be needed to make an investment decision, for Mulpin Research Laboratories Limited financial statements; a business plan; information about ownership of intellectual or industrial property; or expert opinions including valuations or auditors’ reports;

e) Prospective investors should be aware that no established market exists for the trading of any securities or scheme interests that may be offered; and

PROMINENT STATEMENTS

The information contained in the Offer Document about the proposed business opportunity and the securities or scheme interests is not intended to be the only information on which the investment decision is made and is not a substitute for a disclosure document, Product Disclosure Statement or any other notice that may be required under the Act, as that Act may apply to the investment.

Detailed information may be needed to make an investment decision, for Mulpin Research Laboratories Limited: financial statements; a business plan; information about ownership of intellectual or industrial property; or expert opinions including valuations or auditors’ reports.

A prospective investor is strongly advised to take appropriate professional advice before accepting an offer for issue or sale of any securities or scheme interests.

DISCLAIMER

The information contained in this Offer Document (“Offer Document”) is being provided to the recipient solely for the purpose of evaluating an investment in Mulpin Research Laboratories Limited ACN 154 714 011 (“MRLL” or the “Company”).

In consideration of MRLL providing this Offer Document to the recipient, the recipient acknowledges that the contents of this Offer Document are confidential to the Company and the recipient agrees not to disclose, distribute or permit to be communicated verbally, directly or indirectly or otherwise, or to otherwise publish the contents of this Offer Document except with the prior written consent of the Company. For the purposes of this acknowledgement “recipient” includes, without limitation, any principal, director, officer, shareholder, employee or agent of the recipient.

Any reproduction or distribution of the Offer Document, in whole or in part, or any disclosure of its contents, or use of any information contained in this Offer Document for any purpose other than to evaluate an investment in the Company, is prohibited.

The information contained in this Offer Document or subsequently provided to the recipient whether orally or in writing by, or on behalf of the Company or any of their respective related bodies corporate or any of their respective directors, officers, employees, agents, representatives and advisers (“Parties”) is provided to the recipient on the terms and conditions set out in this notice.

The Offer Document provides a summary of the main features of the Company.

It has been prepared without taking into account any investor’s objectives, financial situation or needs. Investors should read the Offer Document carefully and assess whether the information is appropriate for them in respect of their objectives, financial situation and needs, and seek professional advice, if necessary.

The Offer Document does not purport to contain all the information that a prospective investor may require. In all cases, interested parties should conduct their own investigation and analysis of the Company and the data contained in this Offer Document.

To the full extent permitted by law:

(a) no representation or warranty (express or implied) is given; and

(b) no responsibility or liability (including in negligence) is accepted, by the Parties as to the truth, accuracy or completeness of any statement, opinion, forecast, information or other matter (whether express or implied) contained in the Offer Document or its attachments or as to any other matter concerning them.

To the full extent permitted by law, no responsibility or liability (including in negligence) is accepted by the Parties:

(a) for or in connection with any act or omission, directly or indirectly in reliance upon; and

(b) for any cost, expense, loss or other liability, directly or indirectly, arising from, or in connection with, any omission from or defects in, or any failure to correct any information, in this Offer Document or any other communication (oral or written) about or concerning them, or the issue of securities in the Company.

The delivery of the Offer Document does not under any circumstances imply that the affairs or prospects of the Company or any information affecting it have been fully or correctly stated in this Offer Document or have not changed since the date of this Offer Document or since the date at which the information is expressed to be applicable.

No responsibility or liability (including in negligence) is assumed by the Parties for updating any such information or to inform the recipient of any new information of which the Parties may become aware.

The Company makes no representation about the underlying value of the securities on offer. Prospective investors must make their own assessment about whether the price of the securities being offered represents fair value.

FUTURE STATEMENTS

Except for historical information, there may be matters in this publication that are forward-looking statements. Such statements are only predictions and are subject to inherent risks and uncertainty. Forward-looking statements, which are based on assumptions and estimates and describe the Company’s future plans, strategies, and expectations are generally identifiable by the use of the words ‘anticipate’, ‘will’, ‘believe’, ‘estimate’, ‘plan’, ‘expect’, ‘intend’, ‘seek’, or similar expressions. Investors are cautioned not to place undue reliance on forward-looking statements. By its nature, forward-looking information involves numerous assumptions, inherent risks and uncertainties both general and specific that contribute to the possibility that predictions, forecasts, projections and other forward-looking statements will not occur. Those risks and uncertainties include factors and risks specific to the industry in which the Company operates as well as general economic conditions and prevailing exchange rates and interest rates. Actual performance or events may be materially different from those expressed or implied in those statements.

All forward-looking statements attributable to the Company or persons acting on behalf of the Company are expressly qualified in their entirety by the cautionary statements in this section.

Except as expressly required by the Act, the Company undertakes no obligation to publicly update or revise any forward-looking statements provided in this publication whether as a result of new information, future events or otherwise, or the risks affecting this information.

None of the Company, its officers or any person named in this publication with their consent, or any person involved in the preparation of this publication, makes any representation or warranty (express or implied) as to the accuracy or likelihood of fulfilment of any forward-looking statement except to the extent required by law. The forward-looking statements reflect the views held only as at the date of this Offer Document.

NO REPRESENTATIONS

The Company has supplied the content (text, pictorials, diagrams and photographs) contained in this Offer Document, but makes no representations as to its accuracy. Prospective investors are urged to make further enquiry about this investment, as well as seek appropriate professional advice before investing.

FOR PURPOSE OF OFFER ONLY

The Offer Document has been prepared by the Company for the purposes of the Offer and is provided by the Company to the recipient solely for information purposes for use by persons considering participation in the Offer. It does not, nor does it purport to, contain all the information that an investor may require to evaluate the Company and an Offer under this Offer Document.

NO RECOMMENDATION

The provision of this Offer Document is not and should not be considered as a recommendation in relation to an investment in the Company or that an investment in the Company is a suitable investment for the recipient.

INVESTOR ENQUIRIES

This Offer Document does not purport to provide all of the information the recipient may require in order to evaluate an investment in the Company. Recipients should make their own enquiries and evaluations they consider appropriate to verify the information contained in this Offer Document and to determine the suitability of an investment in the Company (including regarding their investment objectives, financial situation, and particular needs) and should seek all necessary financial, legal, tax and investment advice. The Company does not accept any responsibility for any costs incurred by any person in relation to the person’s evaluation of the Company and the Offer under this Offer Document or otherwise.

EXCLUDED OFFER

Any offer of securities of the Company contained in this Offer Document is an offer of securities which does not require disclosure to investors under Part 6D.2 of the Act and is therefore only open to Sophisticated Investors, Professional Investors and other investors to whom an offer can be made under Part 6D.2 of the Act without the need for a disclosure document.

Please complete the form below if you still want to download Mulpin Research Laboratories Limited’s Offer Document.

Once you’ve completed and submitted the form below we will send a copy of the Mulpin Research Laboratories Limited Offer Document to your nominated email address within 24 hours.

*(denotes required field)

News

March 2014

Invitation to Participate in the Acquisition of the Mulpin Patent Portfolio. Click to Read More

March 2014

Allied Security Trust (AST) Has Accepted Via Patent Syndication Patent Portfolio Lot 4868

Click to Read More

February 2014:

Mulpin receives US Patent Number - US8649183

November 2013:

Mulpin receives Notice of Allowance from USPTO

September 2013:

Mulpin has entered the PCT National Phase in Australia, Canada, India, Israel, Malaysia, Singapore & the European Union.

March 2013

Mulpin Research Laboratories Limited Independent Patent Valuation is available upon request.

November 2012:

Mulpin Releases “Mulpin Research Laboratories Limited – The Future of Embedded Technology” – Initial Package. Click Here to Download

August 2012:

MULPIN US PATENT WIPO – PCT AVAILABLE FOR VIEWING….Click Here